Everyone has faced this problem at one point or another: a clogged drain. In order to prevent future occurrences, it is important that you know how to clean out your drain yourself. This article offers three easy steps that can help you clean out your clogged drain and avoid the cost of a professional cleaner.
The first step to cleaning a clogged drain is removing the blockage. Of course, you can’t remove your clogs when they’re still inside the pipe, so you must first remove them from outside your sink. Here are a few tips on how to do this:
Turn off the water by turning on your main water valve at the main meter. This will prevent water from leaking into your pipes and potentially causing additional damage to them.
If you have a garbage disposal installed, turn that off too since it may also be leaking into your pipes. You may want to call in a plumber if you have an older model sink that makes noise with its whirring blades
Why do I need to call a plumber?
If you notice water coming out of your sink or bathtub slowly and slowly getting worse, you may have a clogged drain. A clogged drain can cause major flooding in your home, and can even lead to structural damage. If this happens, it’s important to call for professional plumbing services in Seattle as soon as possible. Here are some easy steps that you can take to clear a clogged drain on your own:
- Clear any obstructions from the drains using a plunger or vacuum cleaner.
- Pour a pot of hot water down the sink and turn on the faucet full blast to create a wave. This will help dislodge any debris that is blocking the pipes.
- Call a professional plumber who can unblock the drain and fix it up for you.
How to Fix a Clogged Drain
If you notice that your drains are becoming clogged, there are a few easy steps you can take to clear the obstruction. Here are the steps:
- Turn off the main water supply to the house or apartment. This will allow you to access the drain without the risk of flooding.
- Use a plunger to push and pull the obstruction out of the drain. If it’s a large object, you may need to use a bucket or another container to catch the debris as you remove it.
- Run hot water down the drain to clear any debris that was caught in the plunger. Remember to turn on the main water supply once all of the debris has been cleared.
If your sink is slowly filling up with water and no matter how much you flush, it doesn’t seem to clear the clog, then there is likely a blockage in the drain. Here are three easy steps to help you clean out a blocked drain:
- Clear out any debris that may be blocking the drain by using a plunger or your hands.
- Pour a pot of boiling water down the drain and wait two minutes. Use a bucket to scoop out the hot water and any debris that has been flushed down the drain.
- Pour a pot of cold water down the drain and wait two minutes. Use a plunger or your hands to push the cold water and any debris down the drain.
Tips for Preventing Drain Clogs in the Future
Drain clogs can happen for a variety of reasons, but there are some simple steps that you can take to prevent them in the future. Here are a few tips to keep in mind:
- Keep your drains clear: Make sure to keep your drains clean by using a plunger or a garbage disposal cleaner. If debris builds up over time, it can block the drain and cause a clog.
- Don’t overfill your sink: Overfilling your sink can also cause water to pool and form clogs. Rather than dumping everything into the sink at once, pour small amounts of water at a time and allow it to flow through the drain.
- Clear away leaves and other debris: Leaves and other debris can get caught in the drain system and block it up. Clear away any leaves or other materials that could be blocking the drain before winter arrives.
Have you ever had a clogged drain? If so, you know just how frustrating it can be when nothing seems to work. In this article, we will show you how to clean out a clogged drain in easy steps, so that you can get back to your normal life as soon as possible. Be sure to read all the steps before starting so that you don’t make any mistakes and end up with a drainage nightmare on your hands.
Step 1: Turn the water off at the main.
Step 2: Use a plunger to push any debris down the drain.
Step 3: Place a bucket under the sink before plunging.
Step 4: Pour in some baking soda and mix it with hot (not boiling) water.
Step 5: Empty the mixture into the drain and let it sit for 10 minutes.
Step 6: Run cold water in there for about 10-15 minutes, then run hot water in there for another 5-10 minutes.
